Le plus récent matériel de formation Novell 50-691

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Novell 50-691. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Novell 50-691.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Novell 50-691 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Novell 50-691 réel est lancée. C'est possible à réussir 100% avec le produit de Novell 50-691. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Novell 50-691, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Novell 50-691 coûtant un peu d'argent.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Novell 50-691. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Novell 50-691.

Pass4Test est un site d'offrir la bonne Q&A Novell 50-691. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.

Code d'Examen: 50-691
Nom d'Examen: Novell (Advanced novell network amnagement:netware 6.5)
Questions et réponses: 178 Q&As

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Novell 50-691 via son guide d'étude. Est-ce que vous vous souciez de test Certification Novell 50-691? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

50-691 Démo gratuit à télécharger: http://www.pass4test.fr/50-691.html

NO.1 Which command would you issue from the console of a NetWare 6.5 server to test its DNS
resolver configuration?
A.CONFIG
B.TCPCON
C.IPCONFIG
D.IFCONFIG
E.NSLOOKUP
F.DNSCONFIG
G.BINDCONFIG
Correct:E

Novell examen   50-691   50-691   certification 50-691   50-691

NO.2 Click the Point-and-Click button to begin. Click on the option that will allow you to check the
version of eDirectory on a server.
Correct:

Novell examen   50-691   50-691   certification 50-691   50-691

NO.3 Click the Point and Click button to begin. Click the TCPCON option you would select if you
wanted to view the MTU size your server is using.
Correct:

Novell examen   50-691   50-691   certification 50-691   50-691

NO.4 Your organization has implemented ZENworks for Servers Tiered Electronic Distribution with
Nterprise Branch Office. To support this configuration, which IP port must be kept open on your
organization's firewall?
A.20
B.21
C.631
D.873
E.1299
F.2222
Correct:E

Novell examen   50-691   50-691   certification 50-691   50-691

NO.5 While installing the Branch Office Appliance software, you are prompted to save the
configuration to a diskette that can be used later during the installation of other Appliances. If you
choose to do so, what filename is the configuration saved under?
A.AUTOEXEC.NCF
B.AUTOLOAD.CNF
C.AUTOLOAD.NBO
D.NBOCONFIG.NCF
E.NBOCONFIG.TXT
F.AUTOCONFIG.NCF
Correct:C

Novell examen   50-691   50-691   certification 50-691   50-691

NO.6 The DirXML driver is comprised of 2 components. What are they? (Choose 2.)
A.Join Engine
B.XML Interface
C.Publisher Filter
D.Subscriber Filter
E.eDirectory Interface
F.Application Native Interface
Correct:B F

Novell examen   50-691   50-691   certification 50-691   50-691

NO.7 While migrating a NetWare 5.1 server to NetWare 6.5 using a Windows 2000 Professional
workstation with Novell Client 4.83 installed, the migration fails. Given that the destination server
has Universal Password deployed, what is the cause of the problem?
A.Universal Password requires Novell Client 4.9 or later.
B.Windows 2000 isn't compatible with Universal Password.
C.The Migration Wizard isn't compatible with Windows 2000 Professional.
D.NMAS must be disabled on the Novell Client 4.83 to be compatible with Universal Password.
E.Novell Client 4.83 requires NICI 2.0.2 or later installed to be compatible with Universal Password.
Correct:A

Novell examen   50-691   50-691   certification 50-691   50-691

NO.8 You're troubleshooting a routing problem in your organization's network. To test a hypothesis,
you need to run the TRACERT command from one of your Windows XP workstations to trace the
route to corp.da.com with the maximum number of router hops constrained to 4. Which command
should you use to do this?
A.TRACERT -4 corp.da.com
B.TRACERT corp.da.com -4
C.TRACERT -H 4 corp.da.com
D.TRACERT -R 4 corp.da.com
E.TRACERT -A 4 corp.da.com
F.TRACERT corp.da.com -D 4
Correct:C

Novell examen   50-691   50-691   certification 50-691   50-691

NO.9 You want to split your DATA volume at the DATA:\USERS subdirectory level to the VOL1 volume
on DA1. DA1 is located in the .Contractors.DA container in the DA-TREE tree. Which command,
when issued from the server console, will do this?
A.VLMN SPLIT DATA:\USERS VOL1
B.VOLMN SPLIT DATA:\USERS VOL1
C.VLMN SPLIT DATA:\USERS VOL1 DA1.Contractors.DA.DA-TREE
D.VLMN SPLIT DATA:\USERS VOL1 .DA1.Contractors.DA.DA-TREE.
E.VOLMN SPLIT DATA:\USERS VOL1 .DA1.Contractors.DA.DA-TREE
F.VOLMN SPLIT DATA:\USERS VOL1 .DA1.Contractors.DA.DA-TREE.
Correct:F

Novell examen   50-691   50-691   certification 50-691   50-691

NO.10 You need to restore an NSS logical volume that was deleted, but has not yet been purged. Click
the area of the graphic that allows you to accomplish this task.
Correct:

Novell examen   50-691   50-691   certification 50-691   50-691

NO.11 Your NetWare 6.5 server has been assigned the DNS name of da1.da.com. Which URL would you
use in a browser window to access the iMonitor service on this server?
A.http://da1.da.com:8009/nds-summary
B.http://da1.da.com:8009/edir-summary
C.https://da1.da.com:8009/nds-summary
D.https://da1.da.com:8008/nds-summary
E.https://da1.da.com:8009/edir-summary
F.https://da1.da.com:8008/edir-summary
Correct:C

Novell examen   50-691   50-691   certification 50-691   50-691

NO.12 You're re-installing the Appliance software on your server. What will happen to your existing
user data?
A.All existing data will be lost when the appliance re-images the drive.
B.The installation program will ask if you want to delete or preserve the existing data.
C.The installation program will prompt you that the Appliance software already exists and will exit.
D.The installation program will save the existing data in the Sys:\System.bak file on the Appliance.
E.The existing data will be detected and copied to a new partition where it can be accessed when the
installation is complete.
Correct:B

Novell examen   50-691   50-691   certification 50-691   50-691

NO.13 When a DFS junction is created, the VLDB assigns the junction a unique ID. Where is this unique
ID stored? (Choose 2.)
A.In the VLDB
B.In ConsoleOne
C.In the volume's ACL
D.In the NetWare Registry
E.In the server's eDirectory object
F.In the volume's eDirectory object
G.In the Registry of the client workstations
Correct:A F

Novell examen   50-691   50-691   certification 50-691   50-691

NO.14 Click the Point-and-Click button to begin. Click the option that allows you to view partition
synchronization information.
Correct:

Novell examen   50-691   50-691   certification 50-691   50-691

NO.15 You have an NSS pool named APPS_POOL. You have taken 4 snapshots of it. What is the
default name assigned by NSS to the 4th snapshot of the pool?
A.APPS_POOL4
B.APPS_POOL-4
C.APPS_POOL_4
D.APPS_POOL_S4
E.APPS_POOL_S_4
F.APPS_POOL_4_S
Correct:D

Novell examen   50-691   50-691   certification 50-691   50-691

NO.16 Which RAID levels can be implemented with NSS? (Choose 2.)
A.0
B.1
C.2
D.3
E.4
F.5
G.6
H.7
Correct:A B

Novell examen   50-691   50-691   certification 50-691   50-691

NO.17 Which method allows you to increase the amount of storage space on a server without adding
more storage devices?
A.Overbook the storage pool.
B.Increase the size of the storage pool.
C.Decrease the size of the storage pool.
D.Recreate the partitions that a storage pool contains.
Correct:A

Novell examen   50-691   50-691   certification 50-691   50-691

NO.18 You've configured a Branch Office system to use automatic user provisioning. When users
attempt to log into the Appliance for the first time, authentication fails. The Appliance is running
on a server with 512 MB of RAM, a Pentium III 1.13 GHz CPU, and a 40 GB hard disk drive. The
users are using Windows 2000 Professional with Novell Client 4.9 installed. What is causing the
problem?
A.The Appliance requires at least 1 GB of RAM.
B.The Appliance requires a Pentium IV or later CPU.
C.Novell Client 4.9 isn't compatible with Universal Password.
D.The workstations must be upgraded to Windows XP Professional.
E.NICI must be disabled on the Novell Client 4.9 before the first login.
F.Windows 2000 Service Pack 4 must be applied to each workstation.
G.NMAS must be disabled on the Novell Client 4.9 before the first login.
H.Novell Client 4.9 Support Pack 1 must be applied to each workstation.
Correct:G

Novell examen   50-691   50-691   certification 50-691   50-691

NO.19 Assuming the CD drive in your workstation is assigned drive letter D, where is the installation
file for the Server Consolidation Utility located?
A.D:\NWSC.EXE
B.D:\SERVCONS.EXE
C.D:\TOOLS\NWSC.EXE
D.D:\TOOLS\SERVCONS.EXE
E.D:\PRODUCTS\SERVCONS\NWSC.EXE
F.D:\PRODUCTS\SERVCONS\SERVCONS.EXE
Correct:E

Novell examen   50-691   50-691   certification 50-691   50-691

NO.20 Which preconfigured report searches the entire tree, communicates with every NetWare server
it finds, and reports errors?
A.Agent Health
B.Obituary Listing
C.Object Statistics
D.Server Information
E.Service Advertising
Correct:D

Novell examen   50-691   50-691   certification 50-691   50-691

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Dernières Novell 50-854 examen pratique questions et réponses

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Novell 50-854 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Vous aurez une assurance 100% à réussir le test Novell 50-854 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Code d'Examen: 50-854
Nom d'Examen: Novell (Cni-netware 5.1 advanced Administration)
Questions et réponses: 152 Q&As

Le test certification Novell 50-854 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Novell 50-854 puisse augmenter la compétition dans ce marché.

Si vous faites toujours la lutte contre le test Novell 50-854, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Novell 50-854. Si vous avez déjà décidé à s'améliorer via Novell 50-854, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

50-854 Démo gratuit à télécharger: http://www.pass4test.fr/50-854.html

NO.1 Which RConsole agent NLM do you run to access the console screens of a NetWare 5.1 server
over an IP connection?
A.AIO.NLM
B.RCONAG6.NLM
C.RCONSOLE.NLM
D.RCONSOLEJ.NLM
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.2 What software provides the cryptography for the Novell Certificate Server? (The acronym is
acceptable.) Answer:
A.NICI
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.3 When you are configuring DHCP, which object identifies the IP addresses available for dynamic
assignment?
A.DHCP Server object
B.Subnet Pool object
C.DNS-DHCP Locator object
D.Subnet Address Range object
Correct:D

Novell examen   50-854   50-854   50-854 examen

NO.4 Which network administration tools can you use to create NDS objects? (Choose 3.)
A.ConsoleOne
B.NDS Manager
C.NetWare Administrator
D.NetWare Management Portal
E.Novell Application Launcher
Correct:A C D

Novell examen   50-854   50-854   50-854 examen

NO.5 Which server console command do you use to prevent unauthorized users from loading NLMs
outside the SYS:SYSTEM directory? Answer:
A.SECURECONSOLE
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.6 In a Public Key Cryptography system, which key do other parties use to validate the key
owner's digital signature?
A.Public key
B.Private key
C.Certificate key
D.Authentication key
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.7 You need to modify the bindery context and NetWare server name for the server. Which file
must you change?
A.SYS:SYSTEM\STARTUP.NCF
B.SYS:SYSTEM\AUTOEXEC.NCF
C.C:\NWSERVER\STARTUP.NCF
D.C:\NWSERVER\AUTOEXEC.NCF
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.8 Which statement best describes a web application server?
A.A central location for public and private discussion groups.
B.A platform that provides the runtime environment for an application's business logic.
C.An application that lets users transfer files to and from the computer on the Internet.
D.An application that publishes documents and files on the World Wide Web or on an intranet.
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.9 What DOS utility is used for creating the DOS partition when installing NetWare 5.1?
A.FDISK
B.FORMAT
C.PARTITION
D.CHKDSK
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.10 Which network administration tool is used to down, restart, or reset a server?
A.ConsoleOne
B.NDS Manager
C.NetWare Administrator
D.NetWare Management Portal
Correct:D

Novell examen   50-854   50-854   50-854 examen

NO.11 Which statements are true regarding the Compatibility Mode Driver? (Choose 2.)
A.CMD encapsulates IPX packets within IP packets by adding an IP header.
B.In its migration agent mode, SCMD will not load if IPX is bound to a network board in the server.
C.IPX must be bound to the network board in the server before SCMD can be loaded in its default mode.
D.Workstations on IP-only segments need CMD configured in order to communicate with servers on
IPX-only segments.
Correct:A D

Novell examen   50-854   50-854   50-854 examen

NO.12 What is the maximum number of Certificate Authority objects that may exist in the NDS tree?
Answer:
A.1
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.13 What is the command to unload all modules from ADDRESS_SPACE2 and remove the address
space?
A.UNLOAD ADDRESS SPACE=ADDRESS_SPACE2
B.UNLOAD KILL ADDRESS SPACE=ADDRESS_SPACE2
C.UNLOAD MODULES ADDRESS SPACE=ADDRESS_SPACE2
D.UNLOAD ADDRESS SPACE=ADDRESS_SPACE2 MODULES=ALL
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.14 What is the default method for an IP server to locate a migration agent?
A.Unicast
B.Multicast
C.Broadcast
D.SAP tables
E.DHCP query
F.Directed broadcast
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.15 The Hung Console Screen is useful if you are unable to execute any commands at the server
console. Which hot key sequence would you use to bring up this screen?
A.Ctrl+Alt+Esc
B.Ctrl+Alt+Del
C.Ctrl+Alt+Tab
D.Ctrl+Shift+Esc
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.16 Which type of DHCP object should you configure to manually assign an IP address to a specific
workstation on the network?
A.IP Address object
B.DHCP Subnet object
C.Subnet Pool object
D.Subnet Address Range object
Correct:A

Novell examen   50-854   50-854   50-854 examen

NO.17 NetWare has 4 types of loadable modules. Which modules control communication between the
server operating system and storage devices?
A.LAN Drivers
B.Disk Drivers
C.NLM Utilities
D.Name Space Modules
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.18 In a Public Key Cryptography system, which key does the key owner use to decrypt data he
receives from other parties?
A.Public key
B.Private key
C.Certificate key
D.Authentication key
Correct:B

Novell examen   50-854   50-854   50-854 examen

NO.19 What NLF file allows you to install more than 1 license certificate at a time into license
Container objects?
A.Folders
B.Objects
C.Envelopes
D.Containers
Correct:C

Novell examen   50-854   50-854   50-854 examen

NO.20 Which NLM is used to configure Network Address Translation on a NetWare 5.1 server? Answer:
A.INETCFG.NLM
Correct:A

Novell examen   50-854   50-854   50-854 examen

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Novell 50-854.

Dernières Novell 50-892 examen pratique questions et réponses

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Novell 50-892. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Le test de Certification Novell 50-892 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Code d'Examen: 50-892
Nom d'Examen: Novell (Novell zenworks 6.5 desktop management)
Questions et réponses: 247 Q&As

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Novell 50-892 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Novell 50-892 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Novell 50-892.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Novell 50-892.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

50-892 Démo gratuit à télécharger: http://www.pass4test.fr/50-892.html

NO.1 You need to deliver applications to your users and workstations that reside in remote locations outside
your organization's firewall. What is required to accomplish this using ZENworks 6.5 Desktop
Management?
A. Load Nal.nlm with the -N switch.
B. Implement the ZENworks Middle-Tier server.
C. Load Appman.nlm with the -PASSTHROUGH switch.
D. Enable dynamic NAT passthrough on the server where ZENworks is installed.
Answer: B

certification Novell   certification 50-892   50-892 examen

NO.2 Which statements are true about NAL application fault tolerance? (Choose 2.)
A. It is configured to handle server failure.
B. It is configured to optimize server utilization.
C. You do not need to create and define application objects.
D. Duplicate application object files must be stored on a different server.
E. Duplicate application objects must be stored on the same server as the application objects.
Answer: AD

Novell examen   50-892   50-892 examen

NO.3 You are configuring the Dynamic Local User policy in a user package for users in your eDirectory tree.
Company policy dictates that any local user accounts created on workstations by the Dynamic Local User
policy must be immediately deleted when users log out. Which type of Dynamic Local User accounts
should you configure the policy to use?
A. Volatile
B. Temporary
C. Transient
D. Nonvolatile
E. Non-persistent
F. The Dynamic Local User policy doesn't support this type of account.
Answer: A

Novell   50-892   certification 50-892   50-892 examen   50-892 examen

NO.4 Which parameter in the Settings.txt file is used to specify the address of your Imaging server?
A. IPADDR
B. SERVER
C. PXEADDR
D. TFTPSRVR
E. PROXYADDR
F. PXESERVER
G. SERVERADDR
H. IMAGESRVRADDR
Answer: E

certification Novell   certification 50-892   50-892   50-892

NO.5 Which Novell application launcher (NAL) settings are applied if custom settings for the user object and
it's parent container are configured?
A. The default settings only
B. The container's custom settings only
C. The user's custom settings will override any conflicts
D. The container's custom settings will override any conflicts
Answer: C

Novell examen   50-892   certification 50-892

NO.6 User MHoffmann.LEADS.SALES.SLC.DA is a member of the ProjectLeads.DA group. You have
associated a user policy package with the DA container that configures user desktops to use the
Corplogo.bmp background. You've also associated a user policy package with the SALES.SLC.DA
container that configures user desktops to use the Corplogo2.bmp background. You've also associated a
user policy package with ProjectLeads.DA that configures user desktops to use the Corplogo3.bmp
background. When MHoffmann logs in, which background will be applied to her workstation?
A. Corplogo.bmp
B. Corplogo2.bmp
C. Corplogo3.bmp
D. The container and group associations are in conflict and, therefore, no background will be applied.
Answer: C

certification Novell   50-892 examen   50-892

NO.7 Which file system rights should users have to the Personality Migration Personality Store directory on
your NetWare server? (Choose 4.)
A. Read
B. Erase
C. Write
D. Create
E. Modify
F. File Scan
G. Access Control
Answer: ACDF

certification Novell   certification 50-892   50-892   50-892 examen

NO.8 Which statements are true about ZENworks 6.5 Desktop Management site lists? (Choose 2.)
A. The Novell Client must be installed to use them.
B. They must be configured differently depending on which client is being used.
C. Users can access applications locally even if they authenticate across the WAN.
D. They can be implemented, regardless of whether users authenticate using the Novell Client or a
ZENworks middle-tier server.
Answer: CD

Novell examen   50-892   50-892 examen   certification 50-892

NO.9 You're configuring a container login script in your eDirectory tree to automatically distribute the ZPMS
Update Agent to your users' workstations. You've copied the Update Agent files from the Update Server to
the Sys:\Public directory on your DA1 NetWare 6.5 server. Which file should you call from within your
login script to install the Update Agent?
A. Setup.bat
B. NetInstall.bat
C. ZPMSAgent.msi
D. UpdateAgent.bat
E. ZPMSUpdateAgent.exe
F. ZENUpdateAgentInstall.bat
Answer: B

Novell examen   50-892   50-892 examen

NO.10 Which tasks can the ZENworks 6.5 Desktop Management Remote Management service accomplish?
(Choose 3.)
A. Remotely boot a powered-off managed workstation.
B. Remotely blank out the managed workstation's screen.
C. Remotely run executables on the managed workstation.
D. Remotely modify the managed workstation's CMOS settings.
E. Remotely access the SCSI ROM BIOS on workstations with SCSI adapters.
Answer: ABC

Novell examen   50-892 examen   50-892   50-892

NO.11 Which file can you edit on the managed workstation to configure the TCP port used by the Remote
Management Agent?
A. Rm.cfg
B. Zrm.ini
C. Rmcfg.ini
D. ZenRm.cfg
E. Remote.ini
F. RemMan.cfg
Answer: C

certification Novell   50-892 examen   50-892   50-892

NO.12 Which type of policy package contains the Workstation Import policy?
A. User policy package
B. Server policy package
C. Container policy package
D. Workstation policy package
E. Service Location policy package
Answer: B

Novell   50-892 examen   50-892   certification 50-892

NO.13 With reference to ZENworks Desktop Management imaging, which term refers to an archived
collection of files to be added to an existing Windows installation on target workstation without overwriting
the existing hard drive contents? (Choose 2.)
A. Add-on image
B. File-only image
C. Workstation image
D. Application overlay
E. Image-safe data area
F. Application transform
Answer: AD

Novell examen   50-892   certification 50-892   50-892

NO.14 What must be installed and configured on the server along with the Middle Tier Server in order for it to
function? (Choose 2.)
A. MySQL
B. Rsync
C. iSCSI
D. iManager
E. NetStorage
F. A web server
G. Workstation Imaging
H. Workstation Inventory
Answer: EF

Novell   50-892   50-892   50-892 examen

NO.15 Which type of ZENworks Personality Migration saves the personality in a file which can be then
transferred to a different computer?
A. Imaged migration
B. Hosted migration
C. Stored migration
D. Delayed migration
E. Deferred migration
F. Real-time migration
G. Suspended migration
Answer: E

Novell   50-892   50-892   certification 50-892   50-892

NO.16 You're configuring a Remote Control session with a remote managed workstation over a slow
connection. Which Color Quality option should you choose for best performance?
A. Normal
B. 8 colors
C. Greyscale
D. 16 colors
E. 256 colors
F. 64k colors
Answer: D

Novell   50-892   50-892 examen

NO.17 Which eDirectory object do you use to generate Inventory reports in ConsoleOne?
A. User
B. Server
C. Workstation
D. Inventory server
E. Inventory database
F. User policy package
G. Workstation policy package
Answer: E

certification Novell   50-892 examen   50-892   certification 50-892   50-892

NO.18 Which utility can be used to create an MST file?
A. iManager
B. Schemax
C. SnAppShot
D. ConsoleOne
E. AdminStudio
Answer: E

Novell examen   50-892 examen   50-892 examen

NO.19 To configure user-defined policies using the ADM files for workstation objects, which policy do you
configure?
A. iPrint
B. Remote control
C. Computer extensible
D. Workstation imaging
E. ZENworks Desktop Management agent
Answer: C

Novell   50-892   50-892

NO.20 Which objects can you associate with a workstation package? (Choose 3.)
A. User
B. Group
C. Alias
D. Server
E. Printer
F. Profile
G. Container
H. Workstation
I. Workstation Group
Answer: GHI

Novell   50-892   50-892   50-892   50-892

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Novell 50-892. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Novell 50-892.

Pass4Test offre une formation sur Novell 50-V37-ENVCSE01 matériaux examen

Le test certification Novell 50-V37-ENVCSE01 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Novell 50-V37-ENVCSE01 puisse augmenter la compétition dans ce marché.

Choisir le Pass4Test peut vous aider à réussir 100% le test Novell 50-V37-ENVCSE01 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

La Q&A Novell 50-V37-ENVCSE01 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Novell 50-V37-ENVCSE01.

Est-que vous s'inquiétez encore à passer le test Certification 50-V37-ENVCSE01 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Novell 50-V37-ENVCSE01? Si vous voulez réussir le test Novell 50-V37-ENVCSE01 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

Code d'Examen: 50-V37-ENVCSE01
Nom d'Examen: Novell (CSE RSA enVision Essentials (new update))
Questions et réponses: 97 Q&As

50-V37-ENVCSE01 Démo gratuit à télécharger: http://www.pass4test.fr/50-V37-ENVCSE01.html

NO.1 When initially setting up a multiple appliance site, only the D-SRV unit is connected to a LAN ?all of the
other units in the site then connect directly to the D-SRV.
A.True
B.False
Answer:B

Novell   50-V37-ENVCSE01   50-V37-ENVCSE01 examen   50-V37-ENVCSE01

NO.2 How many Remote Collectors (RC) can each Database Server (D-SRV) support? (Check the one best
answer.)
A.Eight (8)
B.Ten (10)
C.Sixteen (16)
D.Thirty two (32)
Answer:C

Novell   50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01   certification 50-V37-ENVCSE01

NO.3 What does RSA enVision do when it is set to auto-discover new devices? (Check the one best answer.)
A.Adds new supported devices automatically to the list of monitored devices in the Manage Monitored
Devices screen
B.Temporarily holds in the "New Device" cache and begins to collect data after it is approved by an
administrator
C.RSA enVision alerts members of the "administrators" group to add a new device to the list of monitored
devices
D.RSA enVision automatically exports device attributes to an XML file for an administrator to review
Answer:A

Novell   50-V37-ENVCSE01   certification 50-V37-ENVCSE01   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01

NO.4 If a customer has a specific syslog that they would like to use as part of a demonstration, you can load it
into enVision for reporting and querying using which of the following? (Check the one best answer.)
A.The lsdata utility to import the syslog file
B.Copying the syslog file into the IPDB data directory
C.Using the Data Injector utility to collect data from the syslog file
D.Using the Custom Reports ?View External Data function of the administrative GUI
Answer:C

Novell   50-V37-ENVCSE01   50-V37-ENVCSE01   certification 50-V37-ENVCSE01

NO.5 What are three steps that are part of the device interpretation process using UDS? (Check the three
best answers.)
A.Configure devices to send log data to RSA enVision
B.Device identification (i.e. vendor, device name, class, sub-class, etc.)
C.Identification of device collection method
D.Message definition
E.List of known vulnerabilities
F.Data parsing
Answer:B D F

certification Novell   50-V37-ENVCSE01 examen   50-V37-ENVCSE01 examen   50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01

NO.6 When setting up a Check Point firewall device, which of the following is a good practice that should be
completed first? (Check the one best answer.)
A.Stop and restart the Check Point Firewall Service
B.Stop and restart the enVision NIC Collector Service
C.Verify that the Check Point Log Viewer is receiving events
D.Set an 8-character key to establish an authenticated connection
Answer:C

certification Novell   50-V37-ENVCSE01   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen

NO.7 What two tasks does UDS complete when the command "uds reate" is executed to create a device?
(Check the two best answers.)
A.Creates the files .ini, client.txt, vendor.txt and msg.xml
B.Immediately starts collecting data from the new device
C.Identifies all associated devices that have been configured
D.Create all directory structures required for the device
E.Lists all devices to verify that the device does not already exist
Answer:A D

Novell examen   50-V37-ENVCSE01   certification 50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01

NO.8 When planning an RSA enVision installation, which statements below about the Site Name are
important considerations? (Check two answers.)
A.The Site Name must match an enVision domain name
B.The Site Name must be unique within an enVision domain and cannot be the same as the customer's
NetBIOS domain name
C.The Site Name must not contain any numeric or punctuation characters
D.The Site Name must have the same suffix as the Windows domain in which it resides
E.The Site Name must not match the name of any existing Windows domain in the network
Answer:B E

Novell   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01

NO.9 When would you expect a difference between the log information captured by RSA enVision and the
log information generated by a device? (Check the one best answer.)
A.When the source IP address of the device is unknown to enVision.
B.When the device is configured to send only certain events to syslog.
C.When "Collect All Logs" is left unchecked in the Manage Devices screen.
D.When the device is a known device and enVision recognizes the events to be non-critical.
Answer:B

Novell   50-V37-ENVCSE01   certification 50-V37-ENVCSE01

NO.10 What happens if an event source device type is not immediately recognized by RSA enVision? (Check
the one best answer.)
A.It will be defined as "unknown" and for a limited time enVision will collect event data it generates
B.Data from that device will be discarded until the device type can be defined
C.An alert is generated by default to call an administrator's attention to the device
D.The UDS Service will create a parsing XML file for the device and place data in the NIC Parse Cache
Answer:A

Novell   50-V37-ENVCSE01 examen   50-V37-ENVCSE01   certification 50-V37-ENVCSE01

NO.11 Why would the checkbox of a device type be grayed out On the Manage Device Types screen? (Check
the one best answer.)
A.It's not licensed
B.Device is unknown but data can be collected
C.Device is known but not compatible with enVision
D.Device is associated with a monitored device within the NIC domain
Answer:D

Novell examen   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen

NO.12 True or false. If a conflict exists with the default enVision collection port after appliance installation, the
Collector Service can be modified to configure event collection on a different port.
A.True
B.false
Answer:A

Novell examen   50-V37-ENVCSE01   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01

NO.13 When creating a new enVision user account, which User Group is the account added to by default?
(Check the one best answer.)
A.Report-users
B.Administrators
C.Temporary-users
D.All-applications-users
Answer:D

Novell   certification 50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01

NO.14 When opening a connection in Event Explorer, you can define which of the following features? (Check
the three correct answers.)
A.Devices
B.Event categories
C.Log messages
D.Time frame
E.Local collector
Answer:A B D

Novell   50-V37-ENVCSE01 examen   50-V37-ENVCSE01

NO.15 The UDS development process involves which of the following tasks? (Check two answers.)
A.Verifying XML syntax and parsing
B.Using XML to convert device logs to IPDB format
C.Mapping a device name to an existing enVision device
D.Creating an XML file to define header and message information
Answer:A D

certification Novell   50-V37-ENVCSE01   50-V37-ENVCSE01 examen   certification 50-V37-ENVCSE01

NO.16 In RSA enVision UDS development, Value Maps, Regular Expressions, and Functions are types of
which of the following? (Check the one best answer.)
A.Data Reduction
B.XML Parsing Rules
C.Conditional Variables
D.Summary Data Buckets
Answer:C

certification Novell   50-V37-ENVCSE01   certification 50-V37-ENVCSE01

NO.17 Which RSA enVision module is used to configure the enVision system as well as to monitor its health
and performance? (Check the one best answer.)
A.Overview module
B.Alerts Module
C.Analysis Module
D.Reports Module
Answer:A

certification Novell   50-V37-ENVCSE01   50-V37-ENVCSE01   50-V37-ENVCSE01

NO.18 After creating a customized Report Menu system, which RSA enVision service(s) need to be re-started?
A.Only the NIC Webserver Service
B.The NIC Webserver and NIC Server Services
C.The NIC Webserver, NIC Server and NIC Locator Services
D.The NIC Webserver, NIC Server, NIC Locator, and NIC Packager Services
Answer:A

certification Novell   50-V37-ENVCSE01 examen   50-V37-ENVCSE01 examen

NO.19 In the RSA enVision UDS process, what is the purpose of performing Data Reduction steps? (Check the
one best answer.)
A.Improve speed and efficiency of data processing
B.Compress unsupported device data prior to storage
C.Apply ISO-approved abbreviations to message text strings
D.Decrease the rate that unsupported device data is collected
Answer:A

Novell   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen   50-V37-ENVCSE01

NO.20 The administrator can use the RSA enVision's user authentication feature to complete what tasks?
(Check two answers.)
A.Use an existing Microsoft Active Directory authentication server
B.Associate administrative users with an authentication server
C.Require enVision users to change passwords on a periodic basis
D.Enforce a pre-defined set of 'prohibited passwords' based on a dictionary file
E.Utilize existing domain authenticated user accounts as the basis for enVision user accounts
Answer:A E

Novell examen   certification 50-V37-ENVCSE01   50-V37-ENVCSE01 examen   50-V37-ENVCSE01

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Novell 50-V37-ENVCSE01. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Novell 50-V37-ENVCSE01.

Nortel meilleur examen 920-172, questions et réponses

La Q&A Nortel 920-172 de Pass4Test est liée bien avec le test réel de Nortel 920-172. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Nortel 920-172 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Pass4Test est un seul site de provider le guide d'étude Nortel 920-172 de qualité. Peut-être que vous voyiez aussi les Q&A Nortel 920-172 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Code d'Examen: 920-172
Nom d'Examen: Nortel (NCSS-Nortel Communication Control Toolkit Ris.6.0)
Questions et réponses: 58 Q&As

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Nortel 920-172. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Nortel 920-172 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Nortel 920-172 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Nortel 920-172 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

920-172 Démo gratuit à télécharger: http://www.pass4test.fr/920-172.html

NO.1 After you have restored the Symposium TAPI Database. What is the order in which the following
services need to be started?
A. NCCT Data Access Layer Service, NCCT TAPI Connector, NCCT Server Service Telephony Service,
ACDProxy Service
B. NCCT Data Access Layer Service, NCCT TAPI Connector, ACDProxy Service, Telephony
Service,NCCT Server Service
C. Telephony Service, ACDProxy Service, NCCT Data Access Layer Service, NCCT TAPI Connector,
NCCT Server Service.
D. NCCT Server Service, Telephony Service, ACDProxy Service, NCCT Data Access Layer Service,
NCCT TAPI Connector.
Answer: C

Nortel examen   920-172 examen   920-172 examen   920-172

NO.2 Of the following Third Party software which two does Nortel approve to be installed on a Nortel
Communication Control Toolkit server? (Choose two.)
A. AntiVirus
B. FTP Server
C. pcAnywhere
D. Microsoft Office
Answer: AC

Nortel   certification 920-172   920-172   920-172

NO.3 You are upgrading to Nortel Communication Control Toolkit Rls. 6.0. TAPI 3.0 is currently running. To
what version of TAPI will you have to upgrade?
A. TAPI 4.1
B. TAPI 4.0
C. TAPI 3.1
D. an upgrade in not needed
Answer: C

Nortel   920-172   920-172   certification 920-172

NO.4 You have been instructed to restore the current NCCT database schema. What is the file that you need
to use to restore the current database schema?
A. EmptyDB.zip
B. NCCT_Empty.zip
C. NCCT_Empty.bak
D. NNCCT_Empty.bak
Answer: D

certification Nortel   certification 920-172   920-172   920-172

NO.5 You must configure the Bindings order of the network interface cards using Network Connections from
the Control Panel or My Network Places Properties. What order do the NIC have to be in?
A. The order does not matter.
B. ELAN Subnet first then the Nortel Server Subnet (CLAN) second
C. Nortel Server Subnet (CLAN) first then the ELAN Subnet second
D. Depends on the connection rate of each: the higher rate is listed first.
Answer: C

Nortel   certification 920-172   920-172   920-172 examen   certification 920-172

NO.6 When you install the Communication Control Toolkit server, you must ensure that you have enough
space allocated for the CCT database. What is the minimum and maximum directory size on the default
drive needed to install the NCCT database?
A. minimum of 1 GBytes and maximum size of 2.0 GBytes
B. minimum of 150 MBytes and maximum size of 1.0 GBytes
C. minimum of 68.1 MBytes and maximum size of 2.0 GBytes
D. minimum of 50.7 MBytes and maximum size of 2.1 GBytes
Answer: C

Nortel   certification 920-172   920-172   certification 920-172

NO.7 The Embedded Local Area Network (ELAN Subnet) is a dedicated Ethernet TCP/IP Local Area
Network (LAN). The Customer Local Area Network (Nortel Server Subnet/CLAN) is the LAN to which
corporate services and resources connect. Which is not a rule for configuring the ELAN Subnet and
Nortel Server Subnet (CLAN)?
A. Configure the ELAN Subnet in the same subnet as the ELNK.
B. Configure the ELAN Subnet in a separate subnet from the Nortel Server Subnet.
C. The ELAN Subnet MAC address must be added before the Nortel Server Subnet MAC address.
D. Configure the ELAN Subnet and Nortel Server Subnet network as either completely separate or
integrated using a router.
Answer: C

Nortel   920-172 examen   920-172   certification 920-172   920-172 examen

NO.8 You have just completed a new install of NCCT Rls. 6.0 and have verified that it is configured properly
and operational. You have just finished backing up the NCCT Database and wish to backup the
Symposium TAPI Database. Which of the following would you do perform the backup?
A. Make copy of the spdb.mdb file located in "C:\\Program Files\\Nortel\\CCT\\TAPI"
B. Make copy of the m1spdb.mdb file located in "C:\\Program Files\\Nortel\\Communication Control
Toolkit\\TAPI"
C. Run NCCT Database Administrator and Select the TAPI Database from the Database Drop Down
Menu then Click Backup.
D. Run NCCT Database Administrator and Browse to the TAPI Database location "C:\\Program
Files\\Nortel\\CCT\\TAPI" then Click Backup.
Answer: B

certification Nortel   certification 920-172   certification 920-172   920-172   920-172

NO.9 You are doing a backup of the NCCT Database after making substantial changes. You are asked to
name your backup. What should you always include in the name of your backups?
A. The version of TAPI.
B. The version of NCCT.
C. The date the backup was made.
D. The name NCCT backup somewhere in the name.
Answer: B

certification Nortel   920-172   920-172   920-172 examen

NO.10 You are upgrading to Nortel Communication Control Toolkit Rls. 6.0. You have a Communications
Server 1000/Meridian 1 with Symposium Call Center with Nortel IVR. Which two of the following Service
Provider Software is installed? (Choose two.)
A. TAPI 3.0
B. TAPI 3.1
C. IPML 2.1
D. IPML 4.0
Answer: BC

Nortel   certification 920-172   certification 920-172   920-172

Le test de Certification Nortel 920-172 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Le dernier examen Nortel 922-100 gratuit Télécharger

Le test Nortel 922-100 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Nortel 922-100. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Nortel 922-100. Ajoutez la Q&A au panier.

Code d'Examen: 922-100
Nom d'Examen: Nortel (Communication Server 1000 Rls.4.0 to Rls.5.0 Delta)
Questions et réponses: 30 Q&As

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Nortel 922-100 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Nortel 922-100 réel est lancée. C'est possible à réussir 100% avec le produit de Nortel 922-100. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Nortel 922-100 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Nortel 922-100, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

922-100 Démo gratuit à télécharger: http://www.pass4test.fr/922-100.html

NO.1 A customer is upgrading to a Communication Server 1000E Rls. 5.0. To take advantage of features
supported by the Enterprise Common Manager (ECM) framework, which systems can be deployed as the
ECM? (Choose two.)
A. VxWorks Operating System and ISP 1100
B. Linux Operating System and IBM x306m
C. Linux Operating System and HP DL 320
D. VxWorks Operating System and HP DL 320
E. VxWorks Operating System and IBM x306m
Answer: BC

Nortel   922-100 examen   certification 922-100   922-100

NO.2 A customer has upgraded from a Communication Server (CS) 1000S to a CS 1000E Standard
Availability (SA). Due to their projected company and network growth, they are contemplating upgrading
to a CS 1000E High Availability (HA) system. Which component(s) differentiate a HA system from a SA
system?
A. a second CP-PM
B. enabling the HA software package
C. a second CP-PM and a CP-PM Call Server
D. a second CP-PM and enabling the HA software package
Answer: D

Nortel examen   922-100   922-100   922-100   922-100

NO.3 A customer is upgrading to Communication Server 1000E Rls. 5.0 and needs additional temporary IP
User Licenses for controlled load sharing between two systems.
Which statement is true regarding the licenses to be ordered and the use of additional IP User Licenses?
A. No additional licenses need to be ordered. If the customer runs out of IP User Licenses for the 1150E,
they can use the Basic IP User Licenses.
B. Basic IP User Licenses must be ordered. Regular IP Licenses will be used if the temporary license
count is exceeded.
C. Regular IP User Licenses must be ordered. Basic IP User Licenses will be used if the temporary
license count is exceeded.
D. Temporary User Licenses should be ordered. Basic IP or Regular IP User Licenses will be used if the
temporary license count is exceeded.
Answer: D

certification Nortel   922-100   922-100 examen   922-100 examen

NO.4 A customer is upgrading to a Communication Server 1000E Rls. 5.0. Which hardware components also
provide DSP services? (Choose two.)
A. 32-port DSP Daughterboard
B. 96-port DSP Daughterboard
C. 128-port DSP Daughterboard
D. Media Gateway Controller card (MC32B)
Answer: AB

certification Nortel   certification 922-100   922-100   certification 922-100   922-100

NO.5 A customer is upgrading a Communication Server 1000S to a Communication Server 1000E Rls. 5.0.
Which hardware component replaces the Media Gateway 1000S controller card?
A. DSP Daughterboard
B. Media Card 32 Port Security
C. No hardware change required.
D. Media Gateway Controller card
E. Call Processor Pentium Mobile
Answer: D

Nortel   922-100 examen   922-100   certification 922-100   certification 922-100

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

IBM meilleur examen M2090-643, questions et réponses

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test IBM M2090-643. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification IBM M2090-643. Le guide d'étude de Pass4Test comprend les excercices de IBM M2090-643 et la Q&A qui peut vous permetrre à réussir 100% le test IBM M2090-643. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test IBM M2090-643 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.

Code d'Examen: M2090-643
Nom d'Examen: IBM (Information Management Solution Sales Mastery Test v4 )
Questions et réponses: 37 Q&As

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Avec la version plus nouvelle de Q&A IBM M2090-643, réussir le test IBM M2090-643 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Est-ce que vous vous souciez encore pour passer le test IBM M2090-643? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test IBM M2090-643, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test IBM M2090-643. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

M2090-643 est un test de IBM Certification, donc réussir M2090-643 est le premier pas à mettre le pied sur la Certifiction IBM. Ça peut expliquer certiainement pourquoi le test IBM M2090-643 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test M2090-643. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

M2090-643 Démo gratuit à télécharger: http://www.pass4test.fr/M2090-643.html

NO.1 A customer is looking for a software solution to extract data from heterogeneous
sources, transform the
data to meet operational standards, and then load the data into their warehouse. Which IBM
offering best
meets their needs?
A. IBM InfoSphere Warehouse
B. IBM InfoSphere Information Server
C. IBM InfoSphere Master Data Management
D. IBM InfoSphere Optim
Answer: A

certification IBM   M2090-643   certification M2090-643   M2090-643

NO.2 Which customer challenge is most directly addressed by the Define and Govern facet
of the IBM
Information Agenda?
A. inflexible infrastructure
B. information not viewed as an asset
C. lack of business/IT alignment
D. lack of organizational awareness
Answer: D

IBM   certification M2090-643   certification M2090-643

NO.3 A customer currently has petabytes of data across heterogeneous sources. They want
IBM to design a
solution to extract that data and store it in a centralized database that supports mining,
cubing, and
analytics processes. They also want to improve the quality of their data by creating common
data models
and consolidating duplicate records. Which IBM product is NOT a necessary component in
the solution?
A. IBM InfoSphere Information Server
B. IBM InfoSphere Guardium
C. IBM InfoSphere Warehouse
D. IBM InfoSphere Master Data Management
Answer: B

certification IBM   M2090-643   M2090-643 examen   certification M2090-643

NO.4 What are two analytics capabilities of IBM InfoSphere Warehouse?
A. statistical visualization and reporting
B. dashboards and scorecards
C. cubing services and text mining
D. what-if and scenario modeling
Answer: C

IBM   M2090-643   certification M2090-643   M2090-643

NO.5 IBM IMS is designed for large-scale applications running on which operating system.?
A. AIX
B. Solaris
C. IBM i
D. z/OS
Answer: D

IBM   certification M2090-643   M2090-643   M2090-643 examen

Pour vous laisser savoir mieux que la Q&A IBM M2090-643 produit par Pass4Test est persuadante, le démo de Q&A IBM M2090-643 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test IBM M2090-643 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Dernières IBM C2080-470 de la pratique de l'examen questions et réponses téléchargement gratuit

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test IBM C2080-470 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test IBM C2080-470.

Pass4Test est un catalyseur de votre succès de test IBM C2080-470. En visant la Certification de IBM, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test IBM C2080-470, la Q&A IBM C2080-470 est un bon choix pour vous.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat IBM C2080-470 est bien autorisé. Avec le certificat IBM C2080-470, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A IBM C2080-470.

Code d'Examen: C2080-470
Nom d'Examen: IBM (IBM Unica Campaign V8.5)
Questions et réponses: 108 Q&As

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test IBM C2080-470 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

C2080-470 Démo gratuit à télécharger: http://www.pass4test.fr/C2080-470.html

NO.1 In a Unica Campaign Flowchart, a customer database table (see below) is mapped in a Select process
box. There is a requirement to segment and organize customers based on their income, which would
typically have the values "HIGH" for customers whose income is greater than 100000 and "LOW" for
customers whose income is less than or equal to 100000. This value needs to be output with the final
target list.
Ideally which step should be executed to get the task done?
A. Alter the table to add a new column with the required logic.
B. Create a Persistent Derived field with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
C. Create a Strategic Segment with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
D. Create a User Variable HIGH and LOW with the logic: IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
Answer: B

certification IBM   certification C2080-470   certification C2080-470   C2080-470 examen

NO.2 A table Customer_master contains 1000 customer_ids. A select box was created and all the
customer_ids from the table were selected. However, when the select box was run, the output cell
contained only a fraction of the total customers. When a test query was performed in the above
mentioned select box, all 1000 customers were selected. What could be cause of this issue?
A. Global suppression.
B. The Select process was not configured properly.
C. The table mapping of Customer_master are out-of-date.
D. Incorrect audience level has been chosen for the Customer_master table.
Answer: A

certification IBM   C2080-470   C2080-470   C2080-470

NO.3 A user is mapping a flat file into Unica Campaign. The user needs to ensure that the file ends with a:
A. tab.
B. comma.
C. closing bracket.
D. carriage return, line feed.
Answer: D

certification IBM   certification C2080-470   C2080-470 examen

NO.4 A user has added a new Unica Campaign Attribute and would like to make that attribute available to the
Cognos reports. To do this, the user needs to:
A. use the Reports SQL generator to update the existing reporting views.
B. use the Reports SQL generator to create new views which include the new attribute.
C. do nothing, once the new column is added the reports model is automatically updated.
D. use the Cognos application administrator to create a new data framework which includes the new
attribute.
Answer: B

certification IBM   certification C2080-470   certification C2080-470   C2080-470 examen

NO.5 A specialist creates a numeric user variable called MinBalance and assigns an initial value of 100 to it.
The specialist wants the Select process to return all IDs where the mapped field AccountBalance is
greater than MinBalance. What is the correct syntax to use?
A. MinBalance < AccountBalance
B. AccountBalance > MinBalance
C. AccountBalance > UserVar.MinBalance
D. AccountBalance is GT than UserVar.MinBalance
Answer: C

IBM   C2080-470   C2080-470   certification C2080-470   certification C2080-470

NO.6 The custom macro has been configured to select on "audience id" and a return value. When this custom
macro is executed an error is received. What could cause this problem?
A. There are user variables used in the custom macro.
B. The Expression Type is configured incorrectly for the custom macro.
C. The custom macro is the same as one of the Campaign built-in macros.
D. The custom macro is too large for the fields in the temp table (<TempTable>).
Answer: B

IBM examen   C2080-470 examen   C2080-470   C2080-470 examen

NO.7 Within a flowchart a user wants to switch audiences from the Household level to the Customer level. In
order to do this, a table containing both columns is necessary. This can be accomplished by mapping a
table:
A. into the catalog twice, once at the Household level and once at the Customer Level.
B. into the catalog and select the Household column and the Customer column when selecting the
audience level.
C. in as a base table at the Household level and then map the same table in as a dimension table joined
to the base table on the Customercolumn.
D. in at the Household level as a table is normally mapped and then use the "Specify Additional
Audiences" screen to select the Customer columnwithin the table.
Answer: D

IBM   C2080-470   C2080-470 examen

NO.8 A user is designing a Campaign flowchart. The user wants to retrieve and use a derived field which
was saved in a previous Campaign. Which of the steps below is correct to achieve this task?
A. The user cannot retrieve derived field expressions saved in other Campaigns.
B. Search the previous Campaign and copy the required derived field expression.
C. Retrieve the expression from the Stored Derived fields directory from the Options menu.
D. Retrieve the expression from the Stored Derived fields directory in a Select process box.
Answer: D

certification IBM   C2080-470   C2080-470 examen

NO.9 A user needs to output data from a Unica Campaign flowchart and does not need to utilize the data
within the flowchart. This can be done by creating and outputting the data to a:
A. fact table.
B. general table.
C. dimension table.
D. base record table.
Answer: B

IBM   C2080-470   C2080-470   C2080-470   certification C2080-470

NO.10 In a Unica Campaign flowchart Select process, how can a custom macro be profiled so that it appears in
the Select process "Available Fields" menu?
A. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Item" and
add the macro name and field expression.Go to the "Select" process and choose the macro from the
"Available Fields" column.
B. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Macro"
and add the macro name and fieldexpression. Go to the "Select" process and choose the macro from the
"Available Fields" column.
C. In the "Select" process box, create a "Derived Field" with a field name Profile_Test and enter the macro
name in the expression field. Go tothe "Select" process "Source" tab and select the macro from the
"Available Fields" column.
D. In the "Select" process box "Source" tab, click the Input field and the drop-down list appears. Go to
"Tables", select "UA_CUSTOMMACROS",and select the macro from the list. Select the macro when it
appears in the "Available Fields" column.
Answer: C

IBM   C2080-470   C2080-470   C2080-470   C2080-470

NO.11 A user would like to create a 10% holdout control group from a Cell which contains 1000 Audience IDs.
Which Unica Campaign flowchart process box is the BEST way to accomplish this?
A. Merge process
B. Sample process
C. Segment process
D. Snapshot process
Answer: B

IBM examen   C2080-470   C2080-470 examen   C2080-470 examen

NO.12 In Unica Campaign, how are the Scheduler and Schedule process used?
A. The Schedule process is used to configure the Campaign Scheduler. This enables the use of the
Schedule process in a flowchart.
B. The Scheduler is an administration tool used to configure schedules. Use the Schedule process to
select the schedule to use as part of theflowchart.
C. The Scheduler is a Marketing Platform function that defines Schedule process attributes. The
Schedule process is used to initiate a process,series of processes, or an entire flowchart.
D. The Scheduler starts a flowchart even if it is not running, while the Schedule process in a flowchart
works only if the flowchart is running. TheScheduler should not be used to schedule a flowchart that uses
the Schedule process.
Answer: D

IBM   certification C2080-470   C2080-470   C2080-470 examen

NO.13 A user is trying to create RAW SQL in a Select process. "Select IDs with" is selected but when the user
clicks on the advanced button the "RAW SQL for Record Selection" check box is greyed out. What is the
user doing wrong?
A. The correct tables are not mapped in.
B. A SQL Custom Macro has not been created.
C. The Select process is in Point and Click mode.
D. Unica Campaign is not connected to the database.
Answer: C

IBM   certification C2080-470   C2080-470   C2080-470 examen

NO.14 A specialist is responsible for making sure that Unica Campaign flowcharts run successfully. If an error
occurs, the specialist needs to be informed by email. Therefore, the specialist creates a batch script which
interacts with the mail server and sends an email to the IT department helpdesk to be informed in case
problems arise in a Campaign flowchart. Where can the specialist best relate to this script from within the
Campaign flowchart? The specialist creates an outbound trigger, invokes the batch script in the trigger,
and:
A. assigns a trigger in a mail list or call list process.
B. schedules a trigger to run on a case-by-case basis.
C. uses the eMessage process to send out these emails.
D. assigns it in the Advanced settings section on the Campaign flowchart and has the trigger run on
Flowchart Run Error.
Answer: D

IBM examen   certification C2080-470   C2080-470   C2080-470   certification C2080-470

NO.15 Which of the following is NOT true about how a user variable can be used in Unica Campaign?
A. A user variable can be used in a custom macro.
B. A user variable can be used in an outbound trigger.
C. A user variable can be used within a SQL statement.
D. A user variable can be defined in one flowchart and then referenced in another flowchart.
Answer: D

IBM   C2080-470   C2080-470 examen

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Dernières IBM C2090-610 examen pratique questions et réponses

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification IBM C2090-610. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification IBM C2090-610.

Si vous voulez ne se soucier plus à passer le test IBM C2090-610, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test IBM C2090-610. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A IBM C2090-610 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test IBM C2090-610.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel IBM C2090-610 peut vous assurer à réussir 100% le test IBM C2090-610. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: C2090-610
Nom d'Examen: IBM (DB2 10.1 Fundamentals)
Questions et réponses: 138 Q&As

Choisir le Pass4Test vous permet non seulement à réussir le test IBM C2090-610, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A IBM C2090-610 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A IBM C2090-610 comme votre guide d'étude.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test IBM C2090-610, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test IBM C2090-610 coûtant un peu d'argent.

C2090-610 Démo gratuit à télécharger: http://www.pass4test.fr/C2090-610.html

NO.1 When is it appropriate to use a sequence?
A. When you want to control the order in which triggers are fired.
B. When you want to control the order in which stored procedures can be invoked.
C. When you want to automatically generate a numeric value that is not tied to any specific
column or
table.
D. When you want to automatically generate a numeric value for each row that is added to a
specific
table.
Answer: C

IBM examen   C2090-610 examen   C2090-610

NO.2 When an index is created for a table, where is the metadata for that index stored?
A. In the table definition.
B. In the system catalog.
C. In the schema that the index resides in.
D. In the metadata of the table the index was created for.
Answer: B

IBM   C2090-610   C2090-610   certification C2090-610   C2090-610

NO.3 What are two valid objects that can be created in DB2? (Choose two.)
A. Tree
B. Node
C. Trigger
D. Contexts
E. Sequence
Answer: C,E

IBM examen   certification C2090-610   C2090-610 examen   C2090-610   C2090-610

NO.4 What type of mechanism is a simple token value that is used to refer to a much bigger
large object
(LOB)?
A. locator
B. pointer
C. address
D. reference
Answer: A

certification IBM   C2090-610   C2090-610

NO.5 What type of large object (LOB) is used to store LOB data together with the formatted
rows on data
pages, instead of in a separate LOB storage object?
A. inline
B. binary
C. internal
D. partitioned
Answer: A

IBM   certification C2090-610   C2090-610   C2090-610

NO.6 Given the following DDL statement: CREATE TABLE sales (item CHAR(20)); If a DBA
wishes to
increase the size of the ITEM column, which SQL statement needs to be used?
A. ALTER TABLE sales ADD COLUMN item CHAR(40);
B. ALTER TABLE sales ALTER COLUMN item CHAR(40);
C. ALTER TABLE sales MODIFY COLUMN item CHAR(40);
D. ALTER TABLE sales ALTER COLUMN item SET DATA TYPE CHAR(40);
Answer: D

IBM examen   C2090-610   C2090-610 examen   C2090-610   C2090-610

NO.7 Which tool allows users to connect to a DB2 database using a wizard?
A. Control Center
B. IBM Data Studio
C. Universal Connection Expert
D. DB2 Connection Pool Manager
Answer: B

certification IBM   C2090-610 examen   C2090-610 examen

NO.8 What is the purpose of the Query Tuner?
A. To automatically capture and stop rogue queries.
B. To provide recommendations and analysis for tuning a single query.
C. To provide recommendations and analysis for tuning up to 100 queries.
D. To recommend indexes and to guide DBAs through the process of creating new indexes.
Answer: B

IBM examen   certification C2090-610   certification C2090-610   C2090-610

NO.9 Which two activities indicate the need for a data warehouse? (Choose two.)
A. Confirm product inventory.
B. Monitor product availability.
C. Summarize sales by region.
D. Identify patterns for products sold in the last five years.
E. Associate one or more products with a purchase order.
Answer: C,D

IBM examen   C2090-610   C2090-610 examen   certification C2090-610   certification C2090-610

NO.10 Which DB2 object is used to provide a logical grouping of other database objects?
A. Alias
B. Index
C. Schema
D. Collection
Answer: C

IBM   certification C2090-610   C2090-610   certification C2090-610   C2090-610 examen   C2090-610 examen

NO.11 What functionality allows users to perform a UNION operation between a DB2 table
and an Oracle
view?
A. Oracle connect
B. Trusted context
C. Oracle federation
D. Distributed request
Answer: D

IBM examen   certification C2090-610   C2090-610   C2090-610   certification C2090-610   C2090-610 examen

NO.12 Which type of temporal table can be used to store only time-sensitive data?
A. Bitemporal
B. Time-period
C. System-period
D. Application-period
Answer: D

IBM   C2090-610   C2090-610 examen   C2090-610   C2090-610

NO.13 You have a business need to query DB2 10 and DB2 9 databases and you want to
write an application
that can run on most platforms unchanged. Which interface would you use to achieve your
goal?
A. CLI
B. XML
C. JDBC
D. RUBY
Answer: C

IBM   C2090-610   C2090-610

NO.14 Which DB2 object can be used to improve the execution performance of qualified
SELECT statements?
A. Trigger
B. SQL Procedure
C. Sequence Object
D. Materialized Query Table
Answer: D

IBM   C2090-610   C2090-610   certification C2090-610

NO.15 Which object is a stored procedure defined into?
A. Table
B. Schema
C. Package
D. Database
Answer: B

certification IBM   C2090-610 examen   certification C2090-610   certification C2090-610

NO.16 What is the primary function of an Online Transaction Processing (OLTP) workload?
A. To combine data from multiple sources.
B. To discover hidden relationships in data.
C. To analyze large amounts of data to find patterns.
D. To make changes to a small number of records within a single transaction.
Answer: D

certification IBM   C2090-610   C2090-610

NO.17 Which action needs to be performed in order to complete the definition of an
application-period temporal
table?
A. A transaction-start-id column must be defined for the table.
B. A history table must be defined and associated with the base table.
C. A BUSINESS_TIME period must be specified in a CREATE or ALTER of the table.
D. A unique index must be created that prevents overlapping of the BUSINESS_TIME period
of the table.
Answer: C

IBM examen   C2090-610 examen   certification C2090-610   C2090-610 examen

NO.18 Which product is used to customize execution environments for the purpose of
controlling system
resources so that one department or service class does not overwhelm the system?
A. pureScale
B. Workload manager
C. Data partitioning feature
D. Self-tuning memory manager
Answer: B

IBM examen   C2090-610   C2090-610   C2090-610 examen   C2090-610

NO.19 Which clause should be included in a ALTER TABLE statement to update a table
definition with a new
column?
A. ADD COLUMN
B. ALTER COLUMN
C. APPEND COLUMN
D. RENAME COLUMN
Answer: A

IBM   C2090-610   C2090-610 examen   C2090-610 examen

NO.20 If the following command is executed: CREATE DATABASE test What is the page
size (in kilobytes) of
the database?
A. 4
B. 8
C. 16
D. 32
Answer: A

IBM   C2090-610   certification C2090-610   C2090-610

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM C2090-610, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM C2090-610 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM C2090-610 sans aucune doute.