Le test HP HP0-Y33 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
Le test HP HP0-Y33 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test HP HP0-Y33 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat HP HP0-Y33 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test HP HP0-Y33 avec l'aide de Pass4Test.
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat HP HP0-Y33 est bien autorisé. Avec le certificat HP HP0-Y33, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A HP HP0-Y33.
Code d'Examen: HP0-Y33
Nom d'Examen: HP (Implementing HP Wireless Networks)
Questions et réponses: 97 Q&As
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test HP0-Y33 est lequel très important dans les tests de Certification HP. Pour être qualifié de HP, on doit obtenir le passport de test HP HP0-Y33.
HP0-Y33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y33.html
NO.1 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F
certification HP HP0-Y33 examen HP0-Y33 HP0-Y33 examen HP0-Y33 examen
NO.2 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B
HP HP0-Y33 examen certification HP0-Y33 HP0-Y33
NO.3 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D
HP HP0-Y33 examen HP0-Y33 certification HP0-Y33
NO.4 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E
HP HP0-Y33 examen HP0-Y33 examen
NO.5 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C
certification HP HP0-Y33 examen certification HP0-Y33 HP0-Y33 HP0-Y33
NO.6 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D
HP examen HP0-Y33 HP0-Y33 examen certification HP0-Y33
NO.7 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E
certification HP HP0-Y33 HP0-Y33 HP0-Y33 HP0-Y33
NO.8 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E
HP HP0-Y33 examen HP0-Y33
NO.9 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D
HP HP0-Y33 HP0-Y33 examen HP0-Y33
NO.10 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C
HP examen HP0-Y33 HP0-Y33 examen
NO.11 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A
certification HP HP0-Y33 examen HP0-Y33 HP0-Y33 examen
NO.12 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D
HP examen HP0-Y33 HP0-Y33 HP0-Y33 examen HP0-Y33 examen
NO.13 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D
HP examen HP0-Y33 HP0-Y33
NO.14 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C
certification HP HP0-Y33 examen HP0-Y33
NO.15 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D
HP examen HP0-Y33 HP0-Y33
On doit faire un bon choix pour passer le test HP HP0-Y33. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification HP HP0-Y33 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
没有评论:
发表评论