On doit faire un bon choix pour passer le test HP HP0-841. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification HP HP0-841 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification HP HP0-841. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Le Certificat de HP HP0-841 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat HP HP0-841, c'est-à-dire avoir une grande fortune. Le Certificat HP HP0-841 peut bien tester des connaissances professionnelles IT. La Q&A HP HP0-841 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test HP HP0-841 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test HP HP0-841 réel est lancée. C'est possible à réussir 100% avec le produit de HP HP0-841. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Code d'Examen: HP0-841
Nom d'Examen: HP (Designing and Implementing HP SAN Solutions)
Questions et réponses: 187 Q&As
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
HP0-841 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-841.html
NO.1 What can you do to minimize communication delays between a host and its storage subsystem?
A.cross couple multiple ISLs
B.ensure there is at least one switch hop
C.connect the two devices to the same switch
D.configure a maximum of four active host ports per ISL
Correct:C
certification HP certification HP0-841 certification HP0-841
NO.2 What are the three types of fabric zoning on B-series switches? (Choose three.)
A.static zoning
B.software zoning
C.hardware zoning
D.mixmode zoning
E.QuickLoop zoning
Correct:B C D
certification HP certification HP0-841 certification HP0-841
NO.3 Which software module of HP OpenView Storage Area Manager (SAM) can you use to control
the access of a managed host to a managed storage device?
A.Storage Builder
B.Storage Allocater
C.Storage Accountant
D.Storage Node Manager
Correct:B
certification HP certification HP0-841 certification HP0-841
NO.4 A company is running an application that is READ intensive. They are more concerned with
effective READ performance than WRITE performance. They have a limited number of disks so
they need to minimize RAID overhead. What type of RAID should they use?
A.RAID 0
B.RAID 1
C.RAID 1+0
D.RAID 5
Correct:D
certification HP certification HP0-841 certification HP0-841
NO.5 In Web Tools, which is a valid switch state?
A.down
B.marginal
C.segmented
D.reconfiguring
Correct:A
certification HP certification HP0-841 certification HP0-841
NO.6 In a single fabric, when multiple paths exist between a host and its storage, which statement is
true?
A.The result could be an unstable fabric.
B.Load sharing is automatically set to static.
C.The FSPF protocol determines best route.
D.The path used is determined by port priority.
Correct:C
certification HP certification HP0-841 certification HP0-841
NO.7 The sum of the wait time (in queues) and the service time is _____.
A.data rate
B.request rate
C.response time
D.utilization time
Correct:C
certification HP certification HP0-841 certification HP0-841
NO.8 Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and
physically remove sdb. What happens after the server reboots?
A.The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.
B.The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.
C.The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.
D.The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.
Correct:B
certification HP certification HP0-841 certification HP0-841
NO.9 Which statement applies to trunking on B-Series switches?
A.Oversubsciption is impossible with trunking.
B.If one ISL of a trunk fails, the whole trunk fails.
C.Trunking increases the availability because an I/O is not interrupted, even if the master ISL of a trunk
fails.
D.Trunking is more effecient than individual ISLs because it is less probable that congestion will be
experienced.
Correct:D
certification HP certification HP0-841 certification HP0-841
NO.10 Which three operating systems are supported in an HP heterogeneous SAN? (Choose three.)
A.HP NSK
B.IBM AIX
C.IBM OS400
D.Tru64 UNIX
E.Microsoft Windows 2003 Server
Correct:B D E
certification HP certification HP0-841 certification HP0-841
NO.11 What is the maximum distance per cable segment using 9/125 micron single-mode cable and
long wavelength 2 Gb SFPs?
A.1 km
B.5 km
C.10 km
D.35 km
E.100 km
Correct:C
certification HP certification HP0-841 certification HP0-841
NO.12 What characteristic has the greatest impact on disk performance?
A.bus type
B.drive latency
C.I/O transfer size
D.upgrade from a 1Gb/s HBA to a 2Gb/s HBA
Correct:B
certification HP certification HP0-841 certification HP0-841
NO.13 What are HP SAN management strategies? (Choose two.)
A.automated policy based management
B.policy based backup using the storage management appliance
C.automatic performance optimization using sophisticated high performance management agents
D.storage virtualization using in-band management functionality of the storage management appliance
E.simplified, centralized storage management using standardized web based GUIs residing on a storage
management appliance
Correct:A E
certification HP certification HP0-841 certification HP0-841
NO.14 Which HP SAN Management tool is a highly scalable, Java-based application that manages
multiple B-Series switches and fabrics in real-time?
A.HP StorageWorks Fabric Manager
B.Management Appliance Software v2.1
C.HP OpenView Storage Node Manager
D.HP StorageWorks High Availability Fabric Manager (HAFM)
E.HP OpenView Storage Management Appliance III and HP OpenView Storage Management Appliance
software v2.1
Correct:A
certification HP certification HP0-841 certification HP0-841
NO.15 In the SAN configuration, assume a goal of redundancy for everything. How many Storage
Management Appliances are needed?
A.1
B.2
C.4
D.6
Correct:B
certification HP certification HP0-841 certification HP0-841
NO.16 What is throughput?
A.the number of requests processed per second
B.the number of I/O requests satisfied per unit of time
C.the amount of time a device needs to process a request
D.the time a device takes to process a request from issuance to completion
Correct:B
certification HP certification HP0-841 certification HP0-841
NO.17 What is the internal M-series switch latency of a HP Fibre Channel switch?
A.between 1us and 2us maximum
B.3us
C.5us
D.33us
E.650us
Correct:A
certification HP certification HP0-841 certification HP0-841
NO.18 What is a Fibre Channel fabric?
A.one or more switches connected together, sharing the same name and routing table
B.two or more switches connected together, sharing the same name and routing table
C.one or more switches connected together, each having its own independent name and routing table
D.two or more switches connected together, each having its own independent name and routing table
Correct:A
certification HP certification HP0-841 certification HP0-841
NO.19 What is the correct statement about zoning in an interoperable fabric?
A.WWPN zoning is the only allowed method.
B.A mixture of domain ID, port number and WWPN zoning is allowed.
C.Domain ID and port number zoning are the only allowed methods.
D.Zoning is not allowed. The only way to segment a fabric is using the VSAN technology of C-Series
switches.
Correct:A
certification HP certification HP0-841 certification HP0-841
NO.20 Which three infrastructure components are supported from multiple vendors in an HP Open
heterogenous SAN? (Choose three.)
A.hubs
B.switches
C.ATM gateways
D.storage systems
E.operating systems
Correct:B D E
certification HP certification HP0-841 certification HP0-841
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-841. Votre argent sera tout rendu si vous échouez le test.
没有评论:
发表评论