Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Juniper JN0-533.
Est-ce que vous vous souciez encore de réussir le test Juniper JN0-533? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Est-que vous s'inquiétez encore à passer le test Certification JN0-533 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Juniper JN0-533? Si vous voulez réussir le test Juniper JN0-533 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Choisir le Pass4Test peut vous aider à réussir 100% le test Juniper JN0-533 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Juniper JN0-533. Le guide d'étude de Pass4Test comprend les excercices de Juniper JN0-533 et la Q&A qui peut vous permetrre à réussir 100% le test Juniper JN0-533. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
Code d'Examen: JN0-533
Nom d'Examen: Juniper (FWV, Specialist (JNCIS-FWV))
Questions et réponses: 110 Q&As
JN0-533 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-533.html
NO.1 Click the Exhibit button.
Which two statements are true regarding the route shown in the exhibit? (Choose two.)
A. 5.5.5.0/ 24 was configured as a source route with a next-hop IP address of 1.1.1.1 in the trustvr.
B. 5.5.5.0/ 24 was configured as a destination route with a next-hop IP address of 1.1.1.1 in the
trust-vr.
C. 5.5.5.0/ 24 was configured as a SIBR route with a next-hop IP address of 1.1.1.1 in the trust-vr.
D. 5.5.5.0/ 24 was configured as a permanent source route.
Answer: A,D
Juniper JN0-533 certification JN0-533 certification JN0-533
NO.2 Which two statements are true about VPN Monitor on a ScreenOS device? (Choose two.)
A. With a route-based VPN failure, VPN Monitor marks the tunnel interface status as down.
B. With a policy-based VPN failure, VPN Monitor marks the tunnel interface status as down.
C. VPN Monitor uses UDP to detect a VPN connection failure.
D. VPN Monitor uses ICMP to detect a VPN connection failure.
Answer: A,D
Juniper JN0-533 JN0-533 JN0-533 JN0-533 JN0-533
NO.3 Which two statements are true about policy-based VPNs as compared to route-based IPsec
VPNs when using ScreenOS devices? (Choose two.)
A. For policy-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
B. For route-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
C. For route-based IPsec VPNs, the proxy ID is derived from the policy.
D. For policy-based IPsec VPNs, the proxy ID is derived from the policy.
Answer: B,D
Juniper examen JN0-533 examen certification JN0-533
NO.4 HostA is in the Trust zone and has an IP address of. ServerA is a Web server in the DMZ zone
and has an IP address of.
Which three configuration statements are required to allow traffic from HostA to communicate with
ServerA? (Choose three.)
A. ssg5-> set address Trust HostA / 32
B. ssg5-> set policy from DMZ to Trust ANY ANY ANY permit
C. ssg5-> set address DMZ ServerA / 32
D. ssg5-> set policy from Trust to DMZ HostA ServerA HTTP permit
E. ssg5-> set address Trust HostA / 32
Answer: C,D,E
Juniper examen JN0-533 examen JN0-533 certification JN0-533
NO.5 -- Exhibit -set admin name "admin" set admin password "nOsYMqrbAs/McFsJrs6HwcIt3AF6yn"
set admin user "User1" password "nLZwKErINPPCcphC6sFMXrJ" privilege "read-only" set admin port
8080 set admin access attempts 5 set admin access lock-on-failure 5 set admin auth web timeout 10
set admin auth server "Local" -- Exhibit -
User1 wants to create the policy in the ScreenOS device, but is not successful. Referring to the
exhibit, what is the problem?
A. The User1 account has been suspended.
B. User1 does not have any account in this device.
C. User1 logged in to the device with wrong port.
D. User1 does not have the proper permission to create a policy.
Answer: D
Juniper JN0-533 JN0-533 certification JN0-533
NO.6 Click the Exhibit button.
Referring to the exhibit, what is the appropriate VPN monitor status?
A. The VPN is active and the peer is down.
B. The VPN is active and VPN Monitor is not configured for the peer.
C. The VPN is active and the peer is up.
D. The VPN is inactive and VPN Monitor is not configured for the peer.
Answer: B
certification Juniper JN0-533 examen certification JN0-533
NO.7 You want to set up a last resort route and prevent route lookups in either the source-based
routing table or the destination-based routing table.
What should you do?
A. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a higher metric than other routes.
B. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a lower metric than other routes.
C. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a higher metric than other routes.
D. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a lower metric than other routes.
Answer: C
Juniper JN0-533 certification JN0-533 certification JN0-533 certification JN0-533
NO.8 Click the Exhibit button.
In the exhibit, you have configured the MIP address 1.1.8.64 on a ScreenOS device.
Which statement is correct?
A. It performs one-to-one address translation and maps 1.1.8.64 to 10.1.10.64.
B. It performs one-to-many address translation and maps 1.1.8.64 to a range from 10.1.10.64 to
10.1.10.71.
C. It performs range address translation and maps 1.1.8.64 to 10.1.10.64, 1.1.8.65 to 10.1.10.65,
etc..
D. It performs address translation using a random IP address from the pool for 10.1.10.64 / 29.
Answer: C
Juniper JN0-533 examen JN0-533 JN0-533
NO.9 You have configured integrated Web filtering in the ScreenOS software. A URL appears in the
blacklist, the whitelist, and a user-defined category. Additionally, the device can obtain
categorization information from the SurfControl server.
Which configuration will the device use to determine the action to take for Web requests for the
URL?
A. the blacklist
B. the SurfControl categorization
C. the user-defined category
D. the whitelist
Answer: A
Juniper JN0-533 JN0-533 JN0-533 JN0-533 examen
NO.10 Which two configuration elements are synchronized between the members of an NSRP cluster?
(Choose two.)
A. interface IP addresses
B. hostname
C. track IP configuration
D. static routes
Answer: A,D
Juniper examen JN0-533 JN0-533 JN0-533 JN0-533 examen JN0-533 examen
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Juniper JN0-533, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Juniper JN0-533.
没有评论:
发表评论