Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification IBM C4040-109. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test IBM C4040-109. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test IBM C2140-046 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test IBM A4040-109 est une bonne examination. Mais c'est difficile à passer le test IBM A4040-109. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Code d'Examen: C4040-109
Nom d'Examen: IBM (Virtualization Technical Support for AIX and Linux - v2)
Questions et réponses: 180 Q&As
Code d'Examen: C2140-046
Nom d'Examen: IBM (DOORS V9)
Questions et réponses: 68 Q&As
Code d'Examen: A4040-109
Nom d'Examen: IBM (Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2)
Questions et réponses: 180 Q&As
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test IBM A4040-109.
Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test IBM A4040-109 à la première fois.
La Q&A de Pass4Test vise au test Certificat IBM C4040-109. L'outil de formation IBM C4040-109 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
C4040-109 Démo gratuit à télécharger: http://www.pass4test.fr/C4040-109.html
NO.1 Which of the following is required to support AME?
A. AIX LPARs
B. Virtual I/O Server
C. A maximum of 4GB of RAM per LPAR
D. On-demand memory feature enabled
Answer: A
certification IBM certification C4040-109 C4040-109 examen C4040-109 examen C4040-109 examen
NO.2 Requirements for a disaster recovery site are being collected. When considering restoring a VIO
Server mksysb to disaster recovery hardware,
what is required to ensure automatic virtual device recreation?
A. LPAR profiles must be accurately recreated on the foreign machine
B. Backups of both mksysb and user-defined structures are required from the VIO Server
C. The foreign machine must be of the same model and type
D. Configuration of the existing HMC needs to be preserved
Answer: A
IBM examen C4040-109 examen certification C4040-109 C4040-109 examen certification C4040-109
NO.3 An administrator has a requirement to back up a VIO server (VIOS) so that it can be rebuilt in the
event of a disaster.
Which set of actions will achieve this requirement.?
A. Backup all non rootvg volume groups using savevg. Backup all Storage Pool Information. Run a
mksysb of the system.
B. Save "Upgrade Data" on the HMC. Backup all non rootvg volume groups using savevg. Run a mksysb
of the VIOS with the -U flag.
C. Backup non rootvg structures using savevgstruct. Capture virtual mappings to a file using viosbr. Run a
backupios
D. Capture the virtual network tuning to a file using the optimizenet command. Capture all virtual device
attributes to a file using the lsattr command. Run a backupios.
Answer: C
certification IBM certification C4040-109 C4040-109 examen C4040-109
NO.4 An administrator must remove any installed efixes before attempting to install a new VIO Fix Pack.
Which VIO command will advise if any VIO efixes are actually present?
A. lslpp
B. emgr
C. lssw
D. oem_platform_level
Answer: C
IBM C4040-109 examen certification C4040-109 C4040-109 examen
NO.5 A Power 720 is being used to build 2 environments: Test and Production, with 2 LPARs in each
environment. Processor resources must be separated between the Test and Production environments to
reduce possible contention, while still being able to share processor resources inside each own
environment.
What are the two features required, as a minimum, to accomplish this? (Select 2)
A. IVM
B. HMC
C. PowerVM Express
D. PowerVM Standard
E. IVE
F. IBM Systems Director
Answer: B,D
IBM C4040-109 examen C4040-109 C4040-109
NO.6 An administrator is attempting to configure a new deployment of 56 POWER7 Blades across 4 IBM
BladeCenter H chassis. Each blade will be installed with an IVM and 2 LPARs.IVM is installed and the
administrator checks that both LHEA ports are reporting a Link State of "Up." 2 LPARs are created and the
network traffic balanced by allocating one LHEA port to the first LPAR, the second port to the other. After
successfully installing the first LPAR via NIM, the administrator finds the second LPAR fails to netboot.
What should the administrator verify on the BladeCenter Chassis?
A. That 4 power supplies (PSU) have been installed.
B. That both the external LHEA ports have been cabled.
C. That a secondary I/O module has been installed and cabled.
D. That the Multi-Core Scaling (MCS) attribute is correctly set on both LHEA ports.
Answer: C
certification IBM C4040-109 examen C4040-109 examen certification C4040-109 certification C4040-109 certification C4040-109
NO.7 When attempting to install a VIO client using NIM, an adminstrator finds that no disks are available
for installation. The disks are provided by NPIV through the virtual Fibre Channel adapter as described
here:
Which of the following explains why is the administrator unable to see the disks?
A. The virtual fibre channel device has not been assigned to the client.
B. The HBA on the VIO server is not connected to the SAN.
C. The fibre device drivers are missing from the SPOT.
D. The LUNs have been incorrectly zoned.
Answer: D
certification IBM certification C4040-109 certification C4040-109
NO.8 What tool can an architect use to determine which is the smallest POWER7 server that will provide
equal or better overall performance than a POWER5 570?
A. Facts and Features Guide
B. LPAR Validation Tool
C. Configurator for eBusiness
D. Server Magic
Answer: A
IBM examen C4040-109 certification C4040-109 C4040-109 examen
没有评论:
发表评论