Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A EMC E20-005 E20-002 E20-547 E20-324 de Pass4Test.
Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test EMC E20-005 E20-002 E20-547 E20-324. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test EMC E20-005 E20-002 E20-547 E20-324 à se preuver. Mais le taux du succès et bien bas. Participer le test EMC E20-005 E20-002 E20-547 E20-324 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Code d'Examen: E20-005
Nom d'Examen: EMC (Backup Recovery Systems and Architecture Exam)
Questions et réponses: 120 Q&As
Code d'Examen: E20-002
Nom d'Examen: EMC (Cloud Infrastructure and Services Exam)
Questions et réponses: 118 Q&As
Code d'Examen: E20-547
Nom d'Examen: EMC (VNX Solutions Specialist Exam for Storage Administrators )
Questions et réponses: 203 Q&As
Code d'Examen: E20-324
Nom d'Examen: EMC (VNX Solutions Design Exam for Technology Architects )
Questions et réponses: 117 Q&As
E20-005 Démo gratuit à télécharger: http://www.pass4test.fr/E20-005.html
NO.1 Which type of backup should be used to create a backup copy offline without disrupting I/O operations
on a production volume?
A. Cumulative backup
B. Incremental backup
C. Full backup
D. Synthetic full backup
Answer: D
EMC E20-005 certification E20-005 certification E20-005 certification E20-005
NO.2 What terminology is used to describe grouping several physical drives into one logical drive?
A. Concatenation
B. Partitioning
C. Formatting
D. Grouping
Answer: A
EMC examen E20-005 certification E20-005 certification E20-005 E20-005 examen
NO.3 You are planning the staging policy for disk-to-offsite tape backup media. In addition to available disk
space, which factor is most significant when determining how long to keep the backup data on disk?
A. Length of time when most restore requests are expected to occur
B. Location of offsite storage
C. Cost of shipping and storing tapes
D. Tape capacity
Answer: A
EMC E20-005 certification E20-005 E20-005 E20-005 examen E20-005
NO.4 Which disk connectivity option supports the highest data transfer rate?
A. SATA
B. SCSI
C. IDE
D. ATA
Answer: A
EMC E20-005 examen certification E20-005
NO.5 Which statement defines retention period?
A. Amount of time available for restoring a particular version of a backup dataset
B. Amount of time available for overwriting a volume containing backups
C. Period of time in which a backup must be restored
D. Amount of time allocated for full system recovery
Answer: A
EMC examen E20-005 examen certification E20-005
NO.6 What is the role of the storage node in a client/server backup architecture?
A. Writes data to a backup device
B. Gathers data to be backed up
C. Manages the backup operation
D. Writes metadata to the backup catalog
Answer: A
EMC examen E20-005 E20-005 examen
NO.7 What is the process of moving data from one storage medium to another?
A. Cloning
B. Replication
C. Staging
D. Twinning
Answer: C
EMC examen E20-005 E20-005 E20-005 certification E20-005 E20-005
NO.8 What are the components of a Logical Volume Manager (LVM)?
A. Physical volumes, volume groups, logical volumes
B. Physical groups, volume groups, logical volumes
C. Physical groups, volume groups, logical groups
D. Physical blocks, volume groups, logical groups
Answer: A
certification EMC E20-005 examen E20-005 E20-005 E20-005
NO.9 What is an example of a PCI connection?
A. Parallel interface between a disk and the controller card
B. Interconnection between a CPU and network card
C. Serial connection between a disk and the controller card
D. Interconnection between a tape drive and a computer
Answer: B
EMC E20-005 examen E20-005 examen
NO.10 What is the fault tolerance of a RAID 5 array, where n is the number of disks in the array?
A. 1
B. n-1
C. 2
D. n-2
Answer: A
EMC certification E20-005 E20-005 E20-005 examen
NO.11 What is a benefit of deploying a separate storage node in the backup environment?
A. Reduced number of backups
B. Increased media utilization
C. Improved security and access control
D. Consolidate backup servers
Answer: D
EMC examen E20-005 examen E20-005 certification E20-005 E20-005 examen
NO.12 What is recovery point objective?
A. Maximum allowable time to fully recover an application
B. Actual time that it takes to recover all data
C. Amount of data loss that is acceptable by the business
D. Length of time that backups are kept for recovery purposes
Answer: C
EMC E20-005 examen E20-005 E20-005
NO.13 What is the interval of time between the creation and expiration of the backup called?
A. Retention period
B. Recovery point objective (RPO)
C. Recovery time objective (RTO)
D. Backup window
Answer: A
EMC examen E20-005 E20-005 certification E20-005 E20-005
NO.14 Which type of backup only copies the files that have changed since the last full backup.?
A. Cumulative
B. Full
C. Incremental
D. Synthetic full
Answer: A
EMC examen certification E20-005 E20-005 examen E20-005 E20-005
NO.15 A customer is moving data from a backup disk to tape, which will later will be stored offsite.
What is this process called?
A. Cloning
B. Staging
C. Aging
D. Mirroring
Answer: B
EMC E20-005 E20-005 E20-005 examen
NO.16 A customer has a requirement to restore operations within two hours after a disaster.
What is this time period called?
A. Recovery time objective (RTO)
B. Retention period
C. Recovery point objective (RPO)
D. Backup window
Answer: A
certification EMC E20-005 E20-005
NO.17 A full backup of a file system is performed once a week on Saturday and cumulative backups are
performed on all other days. Backups start at 20:00 with a two-hour window. Data on the file system
changes every day.
How many backups are required to perform a full system restore as of Friday morning?
A. 2
B. 6
C. 1
D. 7
Answer: A
EMC examen certification E20-005 certification E20-005 E20-005
NO.18 Which software component of a backup application sends media metadata to the backup server?
A. Storage node
B. Client
C. NetWorker Management Console
D. Application server
Answer: A
EMC certification E20-005 certification E20-005 E20-005 examen E20-005
NO.19 What is the primary reason for having disaster recovery backups?
A. To restore data from an alternate site due to data loss at a primary site
B. To restore data when data loss or logical corruptions occur during routine processing
C. To restore data that was archived for regulatory compliance
D. To restore data when data loss occurs due to minor hardware component failures
Answer: A
certification EMC certification E20-005 certification E20-005 E20-005 E20-005 examen
NO.20 A business has a recovery point objective (RPO) of nine hours. What does this RPO mean in the event
of a disaster?
A. No more than nine hours of production data can be lost
B. Restore from backup must occur within nine hours
C. Production must be resumed within nine hours
D. A backup copy of the production data must be obtained within nine hours
Answer: A
EMC examen E20-005 examen E20-005 examen E20-005
没有评论:
发表评论